Hubbell Dual_lite PLD10-M Emergency LED Driver, 120-277V, provides a minimum of 90 minutes of emergency lighting,

Hubbell Dual_lite PLD10-M Emergency LED Driver, 120-277V, provides a minimum of 90 minutes of emergency lighting,

$39.77
(No reviews yet) Write a Review
SKU:
Driver_Hubbell_DualLite_PLD10-M--1pk
Adding to cart… The item has been added
  • The PLD10M emergency LED battery pack is designed to provide a minimum of 90 minutes of emergency lighting to commercial or industrial LED fixtures. Operation is fully automatic. A solid-state charger maintains the battery at full charge as long as utility power is present.  Upon interruption of utility power, the unit will activate and the automatic transfer circuit will switch to the emergency mode, keeping the  LED load illuminated for a minimum of 90 minutes. Lumen output during emergency mode is estimated as described below. Upon restoration of utility power, the PLD10M emergency battery pack will return to the charging mode. Full battery recharge is accomplished within 24 hours.  A test switch and LED status indicator light is provided for testing and monitoring of unit performance.
  • Lumens In Emergency Mode = Lumens Per Watt of Fixture * Output Power of Chosen Product (LUMENS) = (LM/W) * W
  • The Dual-Lite PLD10M is a universal input (120-277V) emergency LED battery pack that works with an AC LED driver to allow an LED lighting load to be used in both normal and emergency operation.  When normal AC power is lost, the PLD10M operates to provide 10 watts of constant emergency power at a rated output voltage of 20-56Vdc. The constant power design provides backup for a minimum of 90 minutes with no loss of emergency lumen output.  When used with emergency-only LED fixtures, no AC driver is needed. The UL924 Listing allows for both field and factory installations of suitable LED loads including LED luminaires, DC voltage driven LED replacements for fluorescent lamps and others
  • The Dual-Lite PLD10M consists of a compact case constructed of durable, galvanized steel. The unit contains a solid-state charger with automatic transfer circuit, a 2-wire test switch and LED charging indicator light, and a high-temperature, Nickel-Cadmium battery
  • Can be used with normally-on, normally-off or switched fixtures